Product function
Multi-parameter measurement function: On the one hand, it can measure the total value of the equipment vibration "velocity", and it can automatically compare the measured value with the international ISO vibration standard built into the software. When the measured value exceeds the set standard, a "warning" or "danger" warning will be displayed. On the other hand, it can also perform "acceleration envelope" measurement, and the measured envelope value will be automatically compared with the built-in bearing vibration standard to check whether it meets the standard or display potential bearing failure. At the same time, it can also use infrared sensors to measure temperature and find various abnormal heating parts. It can measure vibration signals and temperature at the same time to display equipment status or bearing damage.
Main functions
• Multifunctional detection, automatic identification: measure vibration velocity, acceleration, acceleration envelope and temperature at the same time, saving time, and displaying four measurement values on the instrument at the same time. It also has Bluetooth automatic identification and 5-minute standby power saving mode. Instant alarm and danger status prompts are provided to improve the reliability of diagnosis
• Quick setup and easy to use: measurement readings in dark environments can be browsed with backlight. Lightweight, compact and user-friendly design, the portable detector ACEPOM330H is easy to store in a belt, pocket or tool bag. IP66 protection level, suitable for various harsh industrial environments.
.
• Wireless charging, strong battery life, long-term energy saving: standard 1.8-inch LCD screen, can provide wired and wireless charging modes. It has high efficiency, economy and environmental protection properties with short charging time and long battery life. It can be used for 10 hours per charge.
• The explosion-proof version has IP66-level triple protection standards, 360º full-scenario explosion-proof: The explosion-proof version has passed ATEX/IECEx/FM intrinsic safety 'ib' level explosion-proof certification, and can be safely used in explosive gas environments in Zone 1/2, explosive dust environments in Zone 21/22 (related to the shell material), and dangerous places such as mining. Exceeding military impact standards, 1.2-meter cement floor drop test; in terms of waterproof performance, it supports IP66 protection level, and can spray water strongly in all directions of the shell without affecting the normal use of the product.
• Remote firmware upgrade, worry-free: Supports free remote upgrade services for mobile phone APP and client firmware.
Vibration acquisition technical parameters
1. Sensor type Piezoelectric vibration acceleration sensor, chip acceleration sensor.
2. Sensor access method Built-in.
3. Gain Automatically adjust the gain.
4. Acquisition type Acceleration and velocity are collected and displayed simultaneously
5. AD accuracy 16 bits
6. Range Acceleration: 0.1-199.9 m/s2 (p); 3.97-7870.08 in/s2 (p) Velocity: 0.7-199.9 mm/s (RMS); 0.04-11 in/s (equivalent to peak value)
7. Frequency response and accuracy: Technical parameters Acceleration: 5-2KHz/±5% 2-5KHz/±3dB Velocity: 10-1KHz/±5% 5-1KHz±3dB Analysis frequency 50K (max)
8. Filtering Low-pass filter (AD comes with) High-pass filter (hardware circuit, cut-off frequency 20KHz) Main technical indicators Basic status Monitoring 2 Anti-aliasing filter (reserved)
9. Acceleration envelope Range: 0.2-50.0 gE Filter: Band 3 (500-10 000 Hz)
10. Analysis frequency 1KHz (default), 5KHz, 10KHz, adjustable
11. Number of sampling points 1024 points (default), 2048, 4096, adjustable
12. Vibration sensitivity setting Set via Bluetooth through APP
13. Vibration value unit switching Supported
Vibration probe Supported
Temperature acquisition Sensor type Infrared temperature sensor
Temperature measurement range -50~350ºC
Measurement accuracy Room temperature -100ºC: ±1ºC or 1% whichever is greater
100-350ºC: ±2%
Measurement distance Short distance, maximum distance to measurement target 10 cm (4 in)
Bluetooth communication Low power Bluetooth
Supports characteristic value upload
Supports acceleration and velocity waveform upload
Inside Bluetooth antenna
LCD screen inch LCD screen
Button 2 keys, used for power on/off and parameter setting
Power supply Rechargeable lithium battery, independent battery compartment, easy to replace
Capacity: 3.7V/2000mAh (103450 battery)
Size: 11*34*53mm (with protection board, molding size)
Wireless charging:Support, charging current: 800mA, charging voltage 5V
Wired charging:Support, 5V/1A
Charging time: Around 2.5hours
Battery life: 10 hours after full charge (1000 measurements)
Explosion-proof certification: Intrinsically safe type: Explosion-proof level: Ex ib IIC T4 Gb (explosion-proof version available)
Work Environment: -20ºC~ +50ºC (explosive hazardous locations);
-20ºC~ +60ºC (non-explosive places)
Storage temperature: -40ºC~+85ºC (battery storage temperature -10ºC~40ºC, continuous storage time less than three months)
Humidity: 95% relative humidity, non-condensing
Protection level: Ip66
Drop: 1.2m (6.6ft), concrete floor
Firmware remote upgrade: mobile APP upgrade, client upgrade
CE certificate: Yes
Weight:125g
Sizes:200*47*25.4mm(7.9in*1.85in*1.00in)
Installation method
Vibration probe can be attached to a magnetic base or held by hand
Audited Supplier 
){kind=link}